Versions Compared

Old Version 5

changes.mady.by.user Tsvetan Georgiev

Saved on

compared with

New Version 6

changes.mady.by.user Tsvetan Georgiev

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

AWX Job Template

Notes

<env_id>-<org_id>-environment-setup

Installs the required software on the bastion host, and setups AWS CLI access.

<env_id>-<org_id>-deploy-fabric-ingress

Deploy k8s ingress controller for the HLF k8s cluster


<env_id>-<org_id>-dns-config-blk


After the ingress is deployed, DNS entries must be setup in order to route the traffic from the configured domain to the k8s cluster load balancers.

Make sure the DNS entries are setup properly before proceeding with the configured domain in the configuration file

<env_id>-<org_id>-deploy-vault

Deploy vault cluster in HLF k8s cluster. The access credential to the vault instance are stored in AWS secrets manager

<env_id>-<org_id>-deploy-fabric-operator

Deploy fabric operator k8s controller

<env_id>-<org_id>-deploy-fabric-console

Deploy operator console. The access to the console is at the address. Note that the address is not configurable as it is assembled by convention. The user and password to access the console are those defined in the credential “fabric-console“

https://{{console_namespace}}-{{console_name}}-console.{{console_domain}}

...

Info

Note that the name(id) pattern of the identities below must be respected as those identities are also used in the application deployment. The variables below used in the naming convention of the resource names are as defined in the organization private config yaml file.


Steps:

Step

Details

Notes

Deploy Certificate Authority

Console → Nodes → Create CA

Create new CA

  • CA name: <ordering_org_id>

  • CA admin enroll id: <ordering_org_id>-ca-admin

  • CA enrollment secret: anything that can be remembered (note it down)


The CA admin is used to register identities with the CA. That includes identities for the organization orderers/peers, organization admins, and the organization application users.

Accosiate CA admin user identity

Console → Nodes → Ordering Service CA

Navigate to the details page of the ordering service CA created above. Make sure the CA is up and running (green light).

Associate (enroll) the CA admin identity registered above during the CA deployment

  • Enroll id: <ordering_org_id>-ca-admin (display name <ordering_org_id>-ca-admin)


Register the ordering service (MSP admin) admin identity

Console → Nodes → Ordering Service CA

Navigate to the details page of the ordering service CA created above.

Register the org admin user using the deployed CA above

  • Enroll id: <ordering_org_id>-msp-admin

  • Type: admin

  • Enroll secret: should be remembered (note it down)

The organization admin user is enrolled with the CA when the organization is created (next step).


Create the ordering service MSP definition

Console → Nodes → Organizations → Create MSP Definition


  • MSP name: <ordering_org_id>

  • MSP id: <ordering_org_id>

  • Enroll ID: <ordering_org_id>-msp-admin

  • Identity Name: <ordering_org_id>-msp-admin

Use the enrollment secret as provided above.

The enrolled admin PKI is stored in vault

Register the ordering node Identity with the ordering service CA

Console → Nodes → Ordering Service CA

On the org CA node register the ordering node identity

  • Register User

  • Enroll Id: <ordering_org_id>-orderer

  • Enroll Secret: remember/note it down, it will be used to enrol the identity later

  • Type: orderer


Enroll Ordering Service Admin TLS

Console → Nodes → Ordering Service CA

Navigate to the details page of the ordering service CA created above.

On the ordering service CA page enroll the identity <ordering_org_id>-msp-admin with the TLS Certificate Authority.

  • Choose enroll identity from the three-dot menu.

  • Choose TLS Certificate Authority in the CA dropdown

  • Use the same enrollment secret as entered during registration of the ordering service admin identity.

  • Store the identity in the wallet under the name <ordering_org_id>-msp-admin-tls.


The enrolment of the ordering service admin user with the ordering service TLS CA is essential. It allows you to administrate the ordering nodes in order to join/remove them on application channels.

Create the ordering service

Console → Nodes → Ordering Service → Create an ordering service

  • Ordering Service name: <ordering_org_id>

  • Without system channel

  • Three ordering node

  • Ordering Service enroll id: <ordering_org_id>-orderer

  • Choose the ordering org MSP and ordering org CA

  • Admin Identity: <ordering_org_id>-msp-admin

More ordering nodes may be added later to scale and distribute the ordering service nodes.



  • Deploy analytics (carrier) endorsing organization

...

The variables below used in the naming convention of the resource names are as defined in the organization’s private config file.

Steps:

Step

Details

Notes

Deploy Certificate Authority

Console → Nodes → Create new CA

Create new CA

  • CA name: <org_id>

  • CA admin enroll id: <org_id>-ca-admin

  • CA enrollment secret: anything that can be remembered (note it down)

Associate (enroll) the CA admin identity registered above during the CA deployment

  • Enroll id: <org_id>-ca-admin (display name <org_id>-ca-admin)


Accosiate CA admin user identity

Console → Nodes → Endorsing Org CA

Navigate to the details page of the endorsing org CA create above. Make sure the CA is up and running (green light).

Associate (enroll) the CA admin identity registered above during the CA deployment

  • Enroll id: <org_id>-ca-admin (display name <org_id>-ca-admin)


Register the organization admin identity

Console → Nodes → Endorsing Org CA

Register the org admin user using the deployed CA above

  • Enroll id: <org_id>-msp-admin

  • Type: admin

  • Enroll secret: should be remembered (note it down)


Create the MSP definition for the organization

Console → Organizations → create MSP definition

  • MSP name: <org_id>

  • MSP id: <org_id>

  • Enroll ID: <org_id>-msp-admin

  • Identity Name: <org_id>-msp-admin

  • Generate Certificates

  • Next and deploy

The same step as for the ordering organization

Register the peer node identity

Console → Nodes → Endorsing Org CA

On the endorsing org CA node register the peer node identity

  • Enroll Id: <org_id>-peer1

  • Enroll Secret: remember note it down

  • Type: peer


Deploy the peer node

Console → Nodes → Add Peer


  • Peer enroll id (name): <org_id>-peer1

  • Choose the endorsing org MSP and CA

  • Choose the peer enrolled identity as registered above

  • Enter the enrollment secret of the <org_id>-peer1 as registered above

  • Accosiate the amdin Identity: <org_id>-msp-admin

More peer nodes can be added later to scale and distribute the peers of the endorsing organization


  • Deploy a carrier endorsing organization

...

Info

The import/export is required only if the organizations are deployed and managed by different fabric consoles. If the same console is used the organizations will be already available


Steps:

Step

Actor

Note

Export the MSP definitions to a file (json)

carrier, analytics, ordering

Console → Organizations → <org_id> → export button in organization tile.

The administrator has to export its own operated organization definition

Export the ordering service

ordering

Console → Nodes → Ordering Services → <ordering_org_id> → export button in ordering clusters tile

Share the definition of the ordering service

ordering

The downloaded file export of the ordering service can be shared with the rest of the organizations using a dedicated private git repository.

Share the MSP definition json file with the other organizations

carrier, analytics, ordering

The downloaded file above can be shared with the rest of the organizations using a dedicated private git repository.

Import the MSP definitions of the other organizations

carrier, analytics, ordering

Console → Organizations → Import MSP definition

Every administrator has to import the MSP definitions of the rest of the network participating MSPs in their own fabric console. This is essential to operate the network like deploying/managing application channels.

Import the ordering service

carrier, analytics

Console → Ordering Services → Add ordering services → import an existing ordering services

Every administrator of an endorsing organization (analytics/carrier) has to import the ordering service that will be used to serve the application channels. Use the shared exported ordering service file provided by the administrator of the ordering service.


Deploy the openIDL channels

...

Info

openIDL network deployment doesn’t depend on or require any custom definition of HLF access control list

More details: https://hyperledger-fabric.readthedocs.io/en/latest/access_control.html



Steps:

Step

Actor

Notes

Create the openIDL default channel

ordering

Console → Channels → Create channel

Channel Name:

defaultchannel

Organizations:

  • Add the MSPs of the carriers and the analytics organizations. Choose as an operator the analytics MSP. The carrier MSPs may have writer/reader permissions.

Ordering organizations:

  • Add the MSP of the ordering service. Assign Administrator permission

Create the channel genesis block

Join the ordering service nodes to the channel

Create the openIDL carrier analytics private channel

Repeat the step for every carrier in the network

ordering

Console → Channels → Create channel

Note that this is the private channel between a single carrier node and the analytics node. Therefore the step should be repeated in order to create specific channels for each pair of carrier/analytics nodes.

Channel Name:

<analytics org id>-<carrier org id>

Organizations:

  • Add the MSPs of the carrier and the analytics organizations. Choose as an operator the analytics MSP. The carrier MSP may have writer/reader permissions.

Ordering organizations:

  • Add the MSP of the ordering service. Assign Administrator permission

Create the channel genesis block

Join the orderering service nodes to the channel


Join peers on public/common/ default channel

Analytics, Carrier

Console → Nodes → Peer → Join channel

The administrators of the analytics and carriers nodes have to join their own peers on the defaultchannel as created above

Select the ordering service

Enter the channel name:

defaultchannel

Select the peers to join the channel and mark it as anchor

Every MSP must have an anchor peer on the channel in order to enable the private communication capability of the channel.

Anchor peers can be updated through channel configuration update transactions.

Join peers on the private channels

Analytics

Console → Nodes → Peer → Join channel

The administrator of the anaylitics node must join the analytics node peer(s) to all the channel created to serve the private communication between the analytics node and the carriers.

Enter the channel name:

<analytics org id>-<carrier org id>

Select the peers to join the channel and mark it as anchor

Every MSP must have an anchor peer on the channel in order to enable the private communication capability of the channel.

Anchor peers can be updated through channel configuration update transactions.

Join peers on the private channel

Carrier

Console → Nodes → Peer → Join channel

Every administrator of the carrier nodes must join their own carrier peer(s) the private channel created above to serve the private communication between the analytics node and the carrier node.

Enter the channel name:

<analytics org id>-<carrier org id>

Select the peers to join the channel and mark it as anchor

Every MSP must have an anchor peer on the channel in order to enable the private communication capability of the channel.

Anchor peers can be updated through channel configuration update transactions.


Deploy the openIDL chaincodes

The openIDL chaincode implements the data call business logic that is endorsed by the peers on the network.


Steps:

Step

Actor

Details

Propose openIDL default chaincode definition

Analytics

Console → Channels → defaultchannel → Propose smart contract definition

Chaincode:

openidl-cc-default


  • Organization: the <org_id>; Organization msp admin: <org_id>-msp-admin

  • Install the smart contract by using the package file (add file):

https://github.com/orgs/senofi/packages?repo_name=openidl-main
The latest version of (*.tgz): openidl-chaincode.openidl-cc-default

  • Smart Contract version: v1 (version increases with every chaincode upgrade)

  • Use the default values for the rest of the steps


The default chaincode is deployed on the defaultchannel and is used to record the data calls issued by the analytics node.

Approve the proposed chaincode definition

Carrier

Console → Notifications

Chaincode:

openidl-cc-default


  • Organization: the <org_id>; Organization msp admin: <org_id>-msp-admin

  • Install the smart contract by using the package file (add file):

https://github.com/orgs/senofi/packages?repo_name=openidl-main
The latest version of (*.tgz): openidl-chaincode.openidl-cc-default

  • Smart Contract version: v1 (version increases with every chaincode upgrade)

  • Use the default values for the rest of the steps


The default chaincode is deployed on the defaultchannel and is used to record the data calls issued by the analytics node.


Commit the chaincode proposal

Analytics

Console → Notifications

Trigger commit of the approved chaincode definition. After a successful commit the chaincode deployment is done.

Chaincode:

openidl-cc-default

Propose openIDL analytics-carrier private chaincode definition

Analytics

Console → Channels → <analytics org id>-<carrier org id> → Propose smart contract definition

Chaincode:

openidl-cc-analytics-carrier


  • Organization: the <org_id>; Organization msp admin: <org_id>-msp-admin

  • Install the smart contract by using the package file (add file):

https://github.com/orgs/senofi/packages?repo_name=openidl-main
The latest version of (*.tgz): openidl-cc-analytics-carrier

  • Smart Contract version: v1 (version increases with every chaincode upgrade)

Use the following template to create a private data collection (PDC)) definition file on your local file system (replace the values with the analytics and carrier specifics.

[
   {
      "name":"<analytics org id>_<carrier org id>_pdc",
      "policy": "OR('<analytics org id>.member', '<carrier org id>.member')",
      "requiredPeerCount":0,
      "maxPeerCount":0,
      "blockToLive":0
   }
]

  • Choose the templated local PDC file to add as PDC definition of the deployment

  • Use the default values for the rest of the steps

Repeat the above step for each analytics-carrier channel

The analytics-carrier chaincode is deployed on each of the analytics-carrier channels. It is used to record the extraction of carrier data on the private data collection shared between the carrier and the analytics nodes.

Approve openIDL analytics-carrier private chaincode definition

Carrier

Console → Notifications

Chaincode:

openidl-cc-analytics-carrier


  • Organization: the <org_id>; Organization msp admin: <org_id>-msp-admin

  • Install the smart contract by using the package file (add file):

https://github.com/orgs/senofi/packages?repo_name=openidl-main
The latest version of (*.tgz): openidl-cc-analytics-carrier

  • Smart Contract version: v1 (version increases with every chaincode upgrade)

  • Use the default values for the rest of the steps

Repeat the above step for each analytics-carrier channel

The analytics-carrier chaincode is deployed on each of the analytics-carrier channels. It is used to record the extraction of carrier data on the private data collection shared between the carrier and the analytics nodes.

Commit the chaincode proposal

Analytics

Console → Notifications

Trigger commit of the approved chaincode definition. After a successful commit the chaincode deployment is done.

Chaincode:

openidl-cc-analytics-carrier